GENERATION 1 WRAP-AROUND AIR BAGS. THE OBJECTIVE OF THE WORK DESCRIBED IN THIS TASK ORDER IS TO DESIGN AND BUILD FULL-SCALE GEN 1 WRAP-AROUND AIR BAGS SUITABLE FOR DROP-TESTING BY NASA. THE INTENT OF THESE DROP TESTS IS TO VERIFY BASIC WAAB PERFORMANCE PREDICTIONS FROM THE LS DYNA ANALYSIS. THESE TESTS ARE NOT INTENDED TO VERIFY THAT THE WRAP-AROUND AIR BAG DESIGN PROVIDES ADEQUATE PERFORMANCE FOR ALL LANDING CONDITIONS, OR TO VERIFY THE STRUCTURAL INTEGRITY OF THE AIR BAGS. IN ORDER TO MEET THE TEST OBJECTIVES AND MINIMIZE SCHEDULE, IT IS NASA S EXPECTATION THAT THE GEN 1 WAAB DESIGN MAY BE VERY SIMILAR TO THE PREVIOUSLY FABRICATED WAAB PROTOTYPE WITH SOME MODIFICATIONS RESULTING FROM: A) LESSONS LEARNED FROM THE PROTOTYPE FABRICATION AND DEPLOYMENT TESTING; AND B) PREVIOUS AND/OR ON-GOING WAAB DESIGN OPTIMIZATION ACTIVITIES. THE GEN 1 WAAB ACTIVITY DESCRIBED IN THIS SOW IS ONE OF FOUR INDIVIDUAL AIR BAG DEVELOPMENT TASKS THAT NASA IS PLANNING TO CONDUCT. THE FOUR AIR BAG DEVELOPMENT TASKS ARE LISTED BELOW AND ARE PLANNED TO BE PHASED APPROXIMATELY AS SHOWN IN FIGURE 1.