SANDING BOOTH SYSTEM | SAM.gov Opportunity | G2X

SANDING BOOTH SYSTEM

SolicitationW911S225U1611Notice typeCombined Synopsis/Solicitation

Attachments

4 files

Name	Type	Posted	Actions
https://dodprocurementtoolbox.com/	LINK	Aug 15, 2025	Download
https://www.acq.osd.mil/asda/dpc/ce/cap/docs/piee/PIEE_Solicitation_Module_Vendor_Access_Instructions.pdf	LINK	Aug 15, 2025	Download
https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml	LINK	Aug 15, 2025	Download
https://piee.eb.mil/sol/xhtml/unauth/search/oppMgmtLink.xhtml?noticeId=W911S225U1611&noticeType=CombinedSynopsisSolicitation	LINK	Aug 15, 2025	Download

Version History

SANDING BOOTH SYSTEM

Combined SynopsisW911S225U1611Aug 18, 2025 · v3

LatestViewing

Opportunity Summary

The Department of the Army, MICC-Fort Drum, is soliciting for a sanding booth system under solicitation number W911S225U1611. This procurement is a combined synopsis/solicitation designated as a Total Small Business Set-Aside (SBA) and is classified under NAICS code 333413, Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing, and PSC 3426, METAL FINISHING EQUIPMENT. Responses are due by August 22, 2025, and David Fortune serves as the point of contact.

The required sanding booth must feature two-stage filtration and accommodate a monorail system through a five-inch overhead gap between front and back sections. The interior working area must measure 7 feet wide by 9 feet 6 inches high by 36 inches deep, with overall outside dimensions of approximately 7 feet 4 inches wide by 10 feet 2 inches high by 12 feet 2 inches deep. Construction specifications include 18-gauge reinforced steel panels with galvanized flanges, high-efficiency LED lighting, and an exhaust system featuring a 36-inch diameter tube-axial fan rated at 15,525 CFM.

Filtration for the unit must include a blanket-style poly roll media first stage and a pocket filter second stage, with an on-board manometer to display air resistance. The exhaust assembly includes a fan connector ring, an inspection plate, a 90-degree elbow for horizontal flow, and an exterior wall-mount louvered damper. All equipment must adhere to NFPA 33 and OSHA CFR-29.1910.107 standards for safety and performance.

Generated by Lumen AI

Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.

Opportunity Summary

Opportunity Details

Response deadline: Aug 22, 2025Expired 285 days ago
NAICS: 333413 (opens in new tab)
PSC: 3426 (opens in new tab)
Set aside: SBA
Published: Aug 15, 2025
Updated: Aug 18, 2025
Agency: DEPT OF THE ARMY (opens in new tab)
Office: W6QM MICC-FT DRUM
Department: —
Source: View on SAM.gov (opens in new tab)

Contact and place of performance

Point of contact: David Fortune

Place of performance: 74501

Original Description

Implemented Amendment to include Set Aside Code from N/A to Total Small Business Set-Aside. Purchase Description for a Sanding BoothScopeThe following document provides the requirements and specifications for the sanding booth.Applicable Documents1. Standards and Regulations:a. NFPA 33b. OSHA CFR-29.1910.1072. Additional DocumentsRequirements3. General RequirementsThis section provides the design specification requirements for the sanding booth.a. Two stage filtration to capture sanding booth dustb. Must accommodate a monorail fed down the middle of the working area4. Specific RequirementsThis section provides specific requirements for the sanding booth equipment requested.a. Inside working dimensionsi. 7 ft. W x 9 ft. 6 in. H x 36 in. D front and back booth section separated by a 5 in. overhead gap for the monorail fed item to be sanding1. Entrance and exit of booth with be notched out to make an overall opening of 25 in. W x 106 in. Tii. 7 ft. 4 in. W x 10 ft. 2 in. H x 12 ft. 2 in. D overall outside dimensions to include the 2-stage filtration and exhaust plenumb. Constructioni. 18g reinforced steel panels1. Pre-punched on 6 in. centers for nut/bolt construction2. Equipped with galvanized companion flanges for rust resistancec. Lightingi. Two 4,000 lumen light fixtures1. Sealed/gasketed2. High efficiency LEDd. Exhaust filtrationi. First stage1. Blanket style poly roll media with Filterloc management system with complete locking frame to hold media in place without gaps or leaksii. Second stage1. Pocket/bag filtersiii. On board manometer1. Displays air resistance across filter systeme. Exhaust fani. 36 in. diameter tube-axial duct fanii. Spark resistant fan bladesiii. Rated at 15,525 CFM at 1.25 in. static, 10 HPiv. Belt driven with motor pulley, fan-pulley, v-belts, motor base, lubricated sealed bearingsv. Thermal resetsf. Exhaust stacki. Fan connector ring to connect fan to boothii. Section of stack above fan equipped with inspection plateiii. 90 deg elbowiv. Section of stack for horizontal flowv. Exterior wall mount louvered damper assembly