Name | Type | Posted | Actions |
|---|---|---|---|
Sources Sought Notice v2.docx | DOCX | May 20, 2026 |
RFI Ballistic Helmets
Contact and place of performance
Homer Rios
DWG, TX 78236
USA
Salient Characteristics The Standardized Security Forces Ballistic Helmet shall: 1. Meet or Exceed National Institute of Justice (NIJ) Level-IIIA with ballistic performance per (IAW) NIJ STD 0106.01/NIJ STD 0108.01. 2. Meet or exceed current Advanced Combat Helmet (ACH) Blunt Impact Protection requirements IAW AR/PD 10-02 while providing a center channel for communication headband clearance. 3. Padding/Li...
View more5. Helmet Cover: Each helmet must come with a helmet cover. Covers must be available in Tactical
Black and Operational Camouflage Pattern (OCP) (Note: The helmet cover must fit on the helmet
reflecting a tactical appearance, i.e., assist with concealment for operations in a tactical
environment). Replacement covers need to be available for replacement purchases. The helmet cover
must have Velcro in the exact locations as the helmet's shell with the addition of a bungee
retention system integrated into the Velcro patch on the top/center of the helmet cover. The helmet
cover must have a cable management system integrated into it. The helmet cover must have an opening
in the front to accommodate the NVG shroud. Helmet covers must come with an optional OCP in color
counterweight pouch with Velcro closure and ability to attach to side rails via strap or elastic
band (tan).
6. Retention System: The retention system must meet ACH pull strength requirements with a
high-strength hook and loop attachment. Feature a dial retention system and a single one-handed
action quick-release capability utilizing high-strength materials resistant to weather and
perspiration degradation. The chinstrap must have locking mechanisms to secure straps and prevent
slippage. Chinstrap must include additional padding sewn into the dual straps for the chin.
7. Chinstrap Extender: Each helmet must come with a chin strap extender to allow the wearer to wear
a Military Chemical Suit Jacket top and the M50 Joint Service General Purpose Gas
Mask. When worn, the chin strap must be able to be fastened with both accouterments.
8. Night Vision Shroud: Each helmet must include a coyote brown or black detachable WILCOX three
hole night vision shroud (Part # 56100G34, Cage: 004S1)compatible with the night vision devices
listed in Para. 8(i).
i. The helmet shroud must accommodate the following accessories:
1) AN/PVS-7B: 5855-01-228-0937
2) AN/PVS-7D: 5855-01-422-5413
3) AN/PVS-14: 5855-01-423-0524
4) AN/PVS-31A: 5855-01-618-8462
5) AN/PSQ-20: 5855-01-534-6449
6) NVG Bracket Mount: 5340-01-509-1467
9. Left and Right Accessory Rail Connector System (Side): Each helmet must include a coyote brown
or black side accessory rails connector system must attach via bolts and be attached on the left
and right sides of the helmet. The rails system must consist of (1) Magpul MOE 5-Slot Mounting Kit
with Two (2) 5-Slot Picatinny Rails for mounting standard Picatinny/MIL-STD-1913 accessories.
a. Due to the past performance of Security Forces units, feedback has indicated the critical need
that all that mounts and rails must be mounted via bolts to provide the necessary security to
minimize potential defects.
b. The end-users need to replace shrouds and rails has been proven relevant.
c. The accessory rail connector system must have slots for custom mounting and compatibility to
accommodate tactical headsets and must be able to adjust the below accessories (see items below
#i).
i. The helmet rails must accommodate the following accessories:
1) Surefire: HLM-01-TN
2) Princeton Tech Switch MPLS LED Task Light
3) Liberator IV and V Advanced Dual Communication Headsets
4) 3M Com-TAC VINIB Peltor Headsets
5) M-50 Gas Mask: 4240-01-512-4437
6) Paulson Riot Shield AGL PPK1007R
10. Ear Clearance: Provide more clearance around the ear than the ACH mid-cut, cover the entire
head area, and have a high-cut ear area. Must have a military-grade Velcro patch on the helmet's
shell on the right and left side above the rail (2" x 3 ½"). Military-grade Velcro patch on the
top/center of the helmet shell (2" x 6 ½").
11. Jump Certification: The helmet must be listed on the United States Air Force (USAF) Approved
for Use List (AUL) as required by Air Force Instruction (AFI) 10-3503, Personnel Parachute Program,
paras. 4.3.1 and 4.4.1.
12. Military-grade Velcro patches: The helmet must have a Military-grade Velcro patch on the
rear/base of the helmet (1 ½" x 6") with (3 ½") in height along the rear of the rails only.
12. Helmet Weight: The helmet weight must be between 1.6 lbs. and 2.8 lbs. before and after
shroud installation, accessory rail, impact liner, and retention system.
13. Fit Sizes: Helmets must accommodate hat sizes from 6 5/8 -7 ½ and 7 3/8 -7 7/8 or head
circumferences (inches) 20.5-23.5 and 23-24.75. Fit head sizes 52-63cm with shell sizes.
14. Care Instructions: Each helmet must come with individual care/handing instructions, how to fit,
and a wear guide included with the helmet.
15. Be fully Berry Amendment compliant.
16. Must accommodate ballistic mandible.
SUBMISSION DETAILS/INFORMATION SOUGHT BY THE GOVERNMENT:
1. Your general company information, to include:
- Company name
- Address
- Point of contact (POC)
- Phone number
- E-mail address
- Commercial and Government Entity (CAGE) Code
- Unique Entity ID
- Business Size (i.e., Small Business, Other than Small)
- NAICS code(s) the company usually performs under
2. Capabilities statement providing sufficient information (such as product literature) describing your company's ability to meet the minimum salient characteristic.
ALL SUBMISSIONS MUST BE RECEIVED NO LATER THAN 1:00PM CENTRAL TIME ON Wed, 3 June 2026.
Packages are to be sent via email to POC:
Homer Rios, Contract Specialist
Emial: [email protected]
The Department of the Air Force, specifically the FA8052 773 ESS PK office, has issued a sources sought notice under solicitation number FA8903772 to identify potential providers of standardized Security Forces ballistic helmets. This requirement is classified under NAICS 314999, All Other Miscellaneous Textile Product Mills. Performance is designated for DWG, Texas, and there is currently no set-aside assigned to this notice. Interested parties are requested to submit capability statements and company information to the identified contract specialist, Homer Rios, no later than June 3, 2026.
The desired helmets must meet or exceed National Institute of Justice Level-IIIA ballistic performance and Advanced Combat Helmet blunt impact protection requirements. Key salient characteristics include a dual-layered adjustable padding system with antimicrobial wicking fabric, a bungee retention system integrated into a helmet cover with cable management, and a dial-retention chinstrap capable of accommodating an M50 gas mask. The equipment must also feature a Wilcox three-hole night vision shroud and a bolted accessory rail system compatible with standard Picatinny mounts and various tactical communication headsets.
Additional specifications require the helmets to be jump-certified and listed on the United States Air Force Approved for Use List. The total weight must range between 1.6 and 2.8 pounds including all shrouds, rails, and liners. The helmets must accommodate a ballistic mandible, be fully Berry Amendment compliant, and provide sizing for head circumferences between 20.5 and 24.75 inches. Submissions should include product literature demonstrating the ability to meet these technical requirements and the specific accessories identified in the notice, such as night vision devices and specialized lighting.
Generated by Lumen AI
Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.