Steel Plates and Beams

The Department of the Army, specifically the W2R2 USA Engineer Research and Development Center, issued award notice W912HZ26Q3424 for the procurement of various steel plates and beams to be delivered to Vicksburg, MS. This requirement was designated as an SBA SBA set-aside. The procurement is classified under NAICS 331210 Iron and Steel Pipe and Tube Manufacturing from Purchased Steel and PSC 9640 IRON AND STEEL PRIMARY AND SEMIFINISHED PRODUCTS.

The technical scope is divided into three tasks involving specific material grades and dimensions. Task 1 includes A572 Grade 50 steel plates and A36 angle iron in 10-foot and 20-foot lengths. Task 2 requires 22 steel plates in 19-foot lengths, with a preference for American Bureau of Shipping AH36, EH36, or DH36, though A588 Grade A is acceptable. Task 3 covers over 100 steel plates of various sizes and three 40-foot W12x22 steel beams utilizing ASTM A992/A572 Grade 50 materials. All plate cutting requirements specify fully cut out parts without ripping, and tolerances for straightness, squareness, and flatness must not exceed 0.125 inches.

This award notice was published and last updated on April 28, 2026, and lists Tam Coronel as the point of contact. There are no attachments associated with this notice. Management of the procurement is handled by the W2R2 USA ENGR R & D CTR.