Name | Type | Posted | Actions |
|---|---|---|---|
7010417939 Sources Sought Attachment.doc | DOC | Dec 3, 2025 |
MODULE ASSEMBLY,JET
Contact and place of performance
Nathanial Young
Not specified
This is a Sources Sought Notice and is for information purposes only. THIS IS NOT A REQUEST FOR PROPOSALS, QUOTATIONS, OR BIDS. All of the following information is approximate and may be altered in the actual solicitation. Responses to this sources sought announcement will be used by the Government to make appropriate acquisition decisions. DLA Land and Maritime anticipates issuing a solicitat...
View more
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE
SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE
ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE
APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON
REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s,
apply to this procurement. Review the Technical Data Package (TDP) for
additional information.
-First Article Testing Report -Production Test and Inspection Report
-Certificate of Quality Compliance
RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
AIRCRAFT LAUNCH AND RECOVERY EQUIPMENT (ALRE) CRITICAL APPLICATION ITEM
SOURCE APPROVAL - TO BE ELIGIBLE FOR AWARD UNDER THIS SOLICITATION, AN
OFFEROR MUST BE AN APPROVED SOURCE OR PROVIDE THE PRODUCT OF AN APPROVED
SOURCE AS DETERMINED BY THE ENGINEERING SUPPORT ACTIVITY, NAVAL AIR
WARFARE CENTER (NAWC) AIRCRAFT DIVISION LAKEHURST. THE CRITERIA AND
PROCEDURES FOR SOURCE APPROVAL ARE CONTAINED IN PART I OF THE NAVAL
INVENTORY CONTROL POINT (NAVICP) PHILADELPHIA BROCHURE ENTITLED "SOURCE
APPROVAL INFORMATION BROCHURE FOR SPARES". THE LATEST VERSION OF THIS
BROCHURE MAY BE OBTAINED BY ACCESSING NAVICP'S WEBSITE:
HTTPS://WWW.NAVSUP.NAVY.MIL, OUR TEAM, NAVICP, BUSINESS OPPORTUNITIES,
COMMODITIES, SOURCE APPROVAL REQUEST (SAR) BROCHURE SPARES
TO ASSIST IN THE DETERMINATION OF SOURCE APPROVAL, THE OFFEROR MAY BE
REQUIRED TO SUBMIT TO A SURVEY PRIOR TO AWARD IN WHICH NAWC LAKEHURST
MAY PARTICIPATE.
IN ADDITION, THE OFFEROR MUST PROVIDE THE FOLLOWING INFORMATION, WHICH
MAY BE CONSIDERED IN DETERMINING WHETHER THE OFFEROR IS AN APPROVED
SOURCE:
(1) A SOURCE APPROVAL LETTER FROM NAVICP'S ENGINEERING AND PRODUCT
SUPPORT DIRECTORATE; OR;
(2) OTHER EVIDENCE INDICATING THAT THE OFFEROR MEETS THE SOURCE APPROVAL
CRITERIA.
ALL REQUESTS FOR WAIVERS OR DEVIATIONS CLASSIFIED AS CRITICAL, MAJOR, OR
MINOR MUST BE FORWARDED TO THE DSC CONTRACTING OFFICER FOR REVIEW AND
APPROVAL.
ALL ITEMS OF SUPPLY SHALL BE MARKED IAW MIL-STD-129. IN ADDITION, EACH
UNIT PACK WILL BE MARKED WITH LOT AND SERIAL NUMBER (IF AVAILABLE),
CONTRACTOR'S CAGE CODE, ACTUAL MANUFACTURER'S CAGE CODE AND PART NUMBER.
(February 2016)
NOTE: THIS IS A RESTRICTED SOURCE ITEM AND
REQUIRES ENGINEERING SOURCE APPROVAL BY THE
GOVERNMENT DESIGN CONTROL ACTIVITY.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
THIS MATERIAL MUST MEET NAVAIR AIRCRAFT LAUNCH <(>&<)>
RECOVERY EQUIPMENT TRACEABILITY REQUIREMENTS. BARE
ITEM MARKINGS SHALL BE IAW THE TECHNICAL DATA
DRAWINGS PROVIDED.
BARE ITEM MATERIAL SHALL BE MARKED WITH CONTRACT
NUMBER, NAWC CAGE, AND PART NUMBER UNLESS OTHERWISE
SPECIFIED ON ASSOCIATED DRAWING. IF A CONFLICT
EXISTS WITH MARKING REQUIREMENTS OF THIS 82N ALRE/SE
ITEM, THE ASSOCIATED DRAWING REQUIREMENTS SHALL APPLY.
RD002, COVERED DEFENSE INFORMATION APPLIES
The Government Procuring Activity has determined that Surplus is not
Acceptable for this NSN.
(End of TQ Requirement)
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to
export-control of either the International Traffic in Arms regulations
(ITAR) or the Export Administration Regulations (EAR), and cannot be
exported without prior authorization from either the Department of State
or the Department of Commerce. Export includes disclosure of technical
data to foreign persons and nationals whether located in the United
States or abroad. This requirement applies equally to foreign national
employees and U.S. companies and their foreign subsidiaries. DFARS
252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control
technical data to DLA contractors that have an approved US/Canada Joint
Certification Program (JCP) certification, have completed the
Introduction to Proper Handling of DOD Export-Controlled Technical Data
Training and the DLA Export-Controlled Technical Data Questionnaire
(both are available at the web address given below), and have been
approved by the DLA controlling authority to access the
export-controlled data. Instructions for obtaining access to the
export-controlled data can be found at:
https://www.dla.mil/Logistics-Operations/Enhanced-Validation/
To be eligible for award, offerors and any sources of supply proposed
for use are required to have an approved JCP certification and have
been approved by the DLA controlling authority to access
export-controlled data managed by DLA. DLA will not delay award in
order for an offeror or its supplier to apply for and receive approval
by the DLA controlling authority to access the export-controlled data.
Casting/forging may be required to manufacture this NSN and tooling is
typically involved. The government may not have this special tooling.
For sourcing, tooling, materials or other information, please submit a
Casting and Forging Assistance Request at either
https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or
Land & Maritime Supply Chains [email protected].
Item Unique Identification is not required by request of the Service
customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ040: Non-Destructive Testing (NDT) Accreditation Requirements
RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for
Manufacturers and Non-Manufacturers
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2
Self-Assessment
CRITICAL APPLICATION ITEM
THE ENTWISTLE COMPANY LLC 20722 P/N 422439-5
ALFAB INC 1B899 P/N 422439-5
IAW REFERENCE DRAWING NR 80020 617296
REVISION NR H DTD 12/21/2015
PART PIECE NUMBER: 617296-1, -6
IAW REFERENCE DRAWING NR 80020 MPR1057
REVISION NR A DTD
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 80020 420674
REVISION NR R DTD 01/09/2024
PART PIECE NUMBER: 420674-4, -5
IAW REFERENCE DRAWING NR 80020 422439
REVISION NR P DTD 06/12/2017
PART PIECE NUMBER: 422439-5
IAW REFERENCE DRAWING NR 80020 617156
REVISION NR AB DTD 01/08/2024
PART PIECE NUMBER: 617156-6
IAW REFERENCE DRAWING NR 80020 514761
REVISION NR F DTD 08/18/2017
PART PIECE NUMBER: 514761-1
IAW REFERENCE QAP 16236 SQAP012204591CFAT
REVISION NR B DTD 11/23/2024
PART PIECE NUMBER:
IAW REFERENCE QAP 16236 SQAP012204591QA
REVISION NR C DTD 11/23/2024
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 16236 CN012204591
REVISION NR C DTD 11/25/2024
PART PIECE NUMBER:
IAW REFERENCE QAP 16236 CDRLS012204591-24302
REVISION NR DTD 10/30/2024
PART PIECE NUMBER:
The anticipated packaging requirements are as follows:
PKGING DATA - MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:GB CUSH/DUNN MAT:GA CUSH/DUNN THKNESS:M
UNIT CONT:FF OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
REQUIREMENTS FOR PROCUREMENT
SPECIAL PACKAGING INSTRUCTIONS:
SEAL OR PLUG ALL OPENINGS WITH APPROVED NONCORROSIVE MATERIALS TO
PREVENT ENTRANCE OF MOISTURE, DIRT AND FOREIGN MATTER.
EACH UNIT PACKAGE WILL BE MARKED WITH THE NSN,
CONTRACT NUMBER, LOT NUMBER, CONTRACTOR CAGE
CODE, MANUFACTURER CAGE CODE, AND PART NUMBER.
Material is anticipated to be shipped to:
PARCEL POST ADDRESS:
SW3216
DLA DISTRIBUTION PUGET SOUND
467 W STREET
BLDG 467
BREMERTON WA 98314-6001
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3216
DISTRIBUTION DEPOT PUGET SOUND
467 W STREET
BLDG 467
BREMERTON WA 98314-6001
US
The solicitation is anticipated to require FOB Origin and Inspection and Acceptance of the supplies and packaging at Origin.
Whether or not this acquisition will be set aside for small businesses is yet to be determined. All interested parties are invited to express your interest in this procurement by completing the attached Market Survey and returning to the buyer, Nathanial Young, [email protected] on or before December 15, 2025.
The Defense Logistics Agency (DLA) Land and Maritime has issued this sources sought notice to identify potential providers for approximately 320 jet module assemblies identified under NSN 1720-012204591. This requirement is classified under NAICS 336611 for Ship Building and Repairing and PSC 1720 for Aircraft Launching Equipment. The module assembly is categorized as an Aircraft Launch and Recovery Equipment (ALRE) Critical Application Item, meaning it is a restricted source item requiring engineering source approval. To be eligible for award, offerors must be an approved source or provide products from a source approved by the Naval Air Warfare Center (NAWC) Aircraft Division Lakehurst.
The anticipated contract will require First Article Testing, Production Test and Inspection Reports, and a Certificate of Quality Compliance. Production involves configuration change management and strict traceability requirements, including the prohibition of mercury and Class I ozone-depleting chemicals. Manufacturing may require specialized casting or forging tooling, which the government may not provide. The technical data for this assembly is subject to export control under ITAR or EAR; therefore, interested parties must have an approved US/Canada Joint Certification Program (JCP) certification and DLA authorization to access the required technical data package.
Responses to this notice will assist the government in making acquisition decisions, including whether to implement a small business set-aside under SBA (Small Business Administration) guidelines. The solicitation is expected to require FOB Origin with inspection and acceptance at the source. Supplies are anticipated for shipment to DLA Distribution Puget Sound in Bremerton, Washington. Interested parties must complete the attached Market Survey and return it to Nathanial Young by December 15, 2025. One attachment, titled 7010417939 Sources Sought Attachment.doc, was published with the notice on December 3, 2025.
Generated by Lumen AI
Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.