No attachments available.
60mm (M721/M767) and 81mm (M819 and M853A1/M816) Body Tube and Tail Cone (BTTC) Assemblies
Contact and place of performance
Gina Pellegrino
Not specified
The U.S. Army Contracting Command–New Jersey (ACC-NJ) located at Picatinny Arsenal, NJ, on behalf of the Office of the Project Manager Combat Ammunition Systems (OPM-CAS), posted solicitation W15QKN23R0008 on Nov 17, 2022, for 60mm M721/M767, 81mm M819, and the 81mm M816/M853A1 Body Tube and Tail Cone (BTTC) assemblies. That contract opportunity was previously synopsized on SAM.gov under Notice ID W15QKN-...
View moreThe 81mm M819 BTTC assemblies are used on the 81mm M819 Smoke Cartridge. The Body Tube is a thin-walled steel tube. A steel adapter is attached to the front end containing internal threads that accept the M772 Fuze. The rear of the Body Tube is machined to be assembled to the M819 Tail Cone. The Body Tube is painted light green. The Tail Cone is a forged or machined aluminum cone. The front of the Tail Cone attaches to the rear of the Body Tube. The rear of the Tail Cone contains internal threads that accept the M28 Fin. The M819 tail cone assembly contains the tail cone and rear disc support.
The 81mm M853A1/M816 BTTC assemblies are used on the 81mm M853A1/M816 Illumination Cartridges. The Body Tube is a thin-walled aluminum tube. A steel adapter is attached to the front end containing internal threads that accept the M772 Fuze. The rear of the Body Tube is machined to be assembled to the M853A1/M816 Tail Cone. The Body Tube is painted white on the exterior. The Tail Cone is a forged or machined aluminum cone. The front of the Tail Cone attaches to the rear of the Body Tube. The rear of the Tail Cone contains internal threads that accept the M28 Fin. The M816/M853A1 contains only the body tube and adapter.
The proposed contract strategy will utilize a competitive, Total Small Business Set-Aside (SBSA), in accordance with Federal Acquisition Regulation (FAR) 6.203, which limits competition of the procurement to Small Businesses within the United States. The United States Government (USG) intends to award multiple (up to two (2)), Firm-Fixed Price (FFP), Indefinite Delivery/Indefinite Quantity (ID/IQ) contracts, which includes a minimum guarantee, for the production of 60mm M721/M767, 81mm M819, and 81mm M816/M853A1 BTTC’s, covering FY24-FY28 requirements. The Base Contract(s) will include five, one-year ordering periods. The total estimated quantity to procure will be 391,500 over the five-year period. Each Delivery Order will be competed amongst contractors selected for award (if applicable).
The 60mm M721/M767, 81mm M819, and the 81mm M816/M853A1 BTTC Assemblies will be manufactured, inspected, assembled, packaged and delivered in accordance with the Government Technical Data Packages (TDP) and applicable contract requirements, which will be available upon solicitation release. This requirement involves technical data marked “Distribution D - Distribution authorized to the Department of Defense and U.S. DoD contractors only.” Interested firms are required to submit a signed and completed Military Critical Technical Data Agreement (DD Form 2345), AMSTA-AR Form 1350, Technical Data Request Questionnaire, and Non-Disclosure Agreement (NDA) for the Government’s consideration to provide access to the TDP.
Please note, this announcement is issued for pre-solicitation notification purposes only and is not a formal request for competitive proposals, nor is the Government obligated to issue a Request for Proposals (RFP). The Government anticipates posting the RFP in 2QFY23. All interested small businesses are advised to monitor the System of Award Management (SAM) for RFP release. The Point of Contact (POC) for this requirement is Gina Pellegrino, ACC-NJ (CCNJ-CA), Bldg. 10, Picatinny Arsenal, NJ 07806-5000. Email: [email protected]. Telephone inquiries will not be accepted. Any information or exchanges between contractors and the Government concerning this notice are at no additional cost and/or obligation to the Government.
The U.S. Army Contracting Command–New Jersey (ACC-NJ), on behalf of the Office of the Project Manager Combat Ammunition Systems (OPM-CAS), is re-issuing a requirement for the production and delivery of 60mm M721/M767, 81mm M819, and 81mm M816/M853A1 Body Tube and Tail Cone (BTTC) assemblies. This pre-solicitation notice, identified as solicitation number W15QKN23R0042, covers components used in various illumination and smoke cartridges, including steel and aluminum thin-walled tubes and forged aluminum tail cones. The acquisition is categorized under NAICS code 332993, Ammunition (except Small Arms) Manufacturing, and PSC 1315, AMMUNITION, 75MM THROUGH 125MM.
The government intends to award up to two Firm-Fixed Price (FFP), Indefinite Delivery/Indefinite Quantity (ID/IQ) contracts through a competitive Total Small Business Set-Aside (SBSA) limited to domestic small businesses. The performance period includes five one-year ordering periods from fiscal year 2024 through fiscal year 2028, with an estimated total procurement quantity of 391,500 assemblies. Manufacturing, assembly, and inspection must adhere to Government Technical Data Packages, which involve technical data restricted to the Department of Defense and U.S. DoD contractors.
The response deadline for this notice is March 9, 2023. While this announcement is for pre-solicitation purposes and does not constitute a formal request for competitive proposals, the government anticipates issuing the formal solicitation in the second quarter of fiscal year 2023. Gina Pellegrino at Picatinny Arsenal, New Jersey, is the designated point of contact for this requirement.
Generated by Lumen AI
Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.