4520--Lyons VAMC Water Heater Replacement Brand Specific to ensure hookups are compatible no additional piping being considered | SAM.gov Opportunity | G2X

4520--Lyons VAMC Water Heater Replacement Brand Specific to ensure hookups are compatible no additional piping being considered

Solicitation36C24226Q0588Notice typeSources SoughtLyons, NJ

Attachments

1 file

Name	Type	Posted	Actions
36C24226Q0588.docx	DOCX	May 4, 2026	Download

Version History

4520--Lyons VAMC Water Heater Replacement Brand Specific to ensure hookups are compatible no additional piping being considered

Sources Sought36C24226Q0588May 4, 2026 · v1

LatestViewing

Opportunity Summary

The Department of Veterans Affairs has issued a Sources Sought notice, solicitation number 36C24226Q0588, to identify providers for the replacement of water heaters at the Lyons VAMC in Lyons, New Jersey. This requirement is classified under NAICS 333414, Heating Equipment (except Warm Air Furnaces) Manufacturing, and PSC 4520, SPACE AND WATER HEATING EQUIPMENT. Responses to this market research inquiry are due by May 11, 2026, to the point of contact, Corey Swinton.

The project scope involves the procurement of brand-specific Patterson-Kelley equipment to ensure compatibility with existing hookups, as no additional piping is being considered for this replacement. Specifically, the agency requires one Patterson-Kelley Model PK-08D semi-instantaneous water heater and one Patterson-Kelley Model PK-10D semi-instantaneous water heater. Both units must be equipped with solid copper nickel pressure vessels, 90/10 double wall copper nickel tube bundles, and all-bronze circulator pumps. The PK-08D is rated to provide 27 GPM of domestic hot water, while the PK-10D is rated to provide 65 GPM, both utilizing steam-powered configurations.

The equipment includes integrated features such as pilot-operated self-contained steam control valves, double solenoid high-temperature limit systems with pre-wired control boxes, and vertical stands that allow for the removal of heating sections without disconnecting domestic water lines. The acquisition also covers factory-authorized start-up, training, and electronic operation and maintenance manuals. A single attachment, 36C24226Q0588.docx, was posted with the notice on May 4, 2026.

Generated by Lumen AI

Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.

Opportunity Summary

Opportunity Details

Response deadline: May 11, 2026Expired 24 days ago
NAICS: 333414 (opens in new tab)
PSC: 4520 (opens in new tab)
Set aside: —
Published: May 4, 2026
Updated: May 4, 2026
Agency: VETERANS AFFAIRS, DEPARTMENT OF (opens in new tab)
Office: VETERANS AFFAIRS, DEPARTMENT OF
Department: —
Source: View on SAM.gov (opens in new tab)

Contact and place of performance

Point of contact: Corey Swinton

Place of performance

Lyons, NJ 07939-5001

USA

Original Description

Qty 1 Patterson-Kelley Model PK-08D Semi-Instantaneous Water Heater rated to provide 27 GPM of Domestic Hot Water from 40-120F when supplied with 25 psig Inlet Steam and 5 psig in the Coil @ 1122#/hr. Heater to be furnished with the following features and controls to meet the specified demand: - Solid Copper Nickel Pressure Vessel rated for 150 psi ASME working pressure. - Factory Insulation. - 90/10 Double Wall Copper Nickel Tube Bundle rated for 150 psi ASME working pressure and 210F test pressure. - All bronze circulator pump, 1/6HP, NYC Trim Package, 115v/1ph/60Hz, with isolation valves, ball and check valves, and venturi tees. - 1 Â½ Spence Pilot Operated, Self-Contained Steam Control Valve. - 1 Â½ Wye Strainer. - Â¾ ASME Temperature & Pressure Relief Valve at 150 psi. - Â¾ ASME Pressure Only Relief Valve (Shipped Loose). - 1 Â½ Float & Thermostatic Condensate Steam Trap & Strainer (Shipped Loose). - Â½ Auxiliary Drip Tap (Shipped Loose). - Â¾ Drain Valve Factory Installed. - Double Solenoid High Temperature Limit System with pre-wired control box. - Vertical Stand suitable for removal of heating section without disconnection of domestic water lines. - Â¾ Vacuum Breaker Factory Installed. - 3 Â½ Dial Thermometer & Bundle Steam Pressure Gauge. - Operation & Maintenance Manuals in electronic form. - Factory Authorized Start-Up & Training Tags: 276458 (WH-2) Qty 1 Patterson-Kelley Model PK-10D Semi-Instantaneous Water Heater rated to provide 65 GPM of Domestic Hot Water from 40-140F when supplied with 40 psig Inlet Steam and 25 psig in the Coil @ 3469#/hr. Heater to be furnished with the following features and controls to meet the specified demand: - Solid Copper Nickel Pressure Vessel rated for 150 psi ASME working pressure. - Factory Insulation. - 90/10 Double Wall Copper Nickel Tube Bundle rated for 150 psi ASME working pressure and 210F test pressure. - All bronze circulator pump, 1/6HP, NYC Trim Package, 115v/1ph/60Hz, with isolation valves, ball and check valves, and venturi tees. - 2 Â½ Spence Pilot Operated, Self-Contained Steam Control Valve. - 2 Â½ Wye Strainer. - 1 ASME Temperature & Pressure Relief Valve at 150 psi. - 1 Â½ ASME Pressure Only Relief Valve (Shipped Loose). - 1 Â½ Float & Thermostatic Condensate Steam Trap & Strainer (Shipped Loose). - Â½ Auxiliary Drip Tap (Shipped Loose). - Â¾ Drain Valve Factory Installed. - Double Solenoid High Temperature Limit System with pre-wired control box. - Vertical Stand suitable for removal of heating section without disconnection of domestic water lines. - Â¾ Vacuum Breaker Factory Installed. - 3 Â½ Dial Thermometer & Bundle Steam Pressure Gauge .