Defense Supply Center of Richmond (DSCR) HVAC Demo
Contact and place of performance
Benjamin Maxwell
Richmond, VA 23237
USA
Combined Synopsis/Solicitation for commercial goods and services IAW FAR part 12. Defense Supply Center Richmond (DSCR) B60 HVAC Demo This is a solicitation for construction prepared in accordance with the format in FAR Part 36, as supplemented with additional information included in this notice. The solicitation number SP4703-26-Q-0045 is issued as a request for quote (RFQ). The resulting contract will be a firm-fix...
View moreThe contractor shall:
3.1 Mobilization
• Submit an Asbestos Abetment Plan for acceptance prior to mobilization
• Deliver any equipment that is to be used in the running of this project such as: scaffolds/lifts, safety equipment, power/metal working tools, etc.
• Set up a ventilation system to ensure proper air filtration, decontamination and to always maintain a negative air pressure in the containment area.
3.2 Site Preparation and Protection
• Install barriers to isolate the work area.
• Make any preparations necessary to ensure the area is contained so that no debris leave the designated work area.
3.3 Asbestos Abatement
• Removal Method: Utilize a mechanical method to remove all material that contains asbestos.
o The contractor is to submit their method of removal with their proposal, if rejected with applicable time the
contractor may revise their proposal with alternative removal method.
• Provide Personal Protective Equipment such as respirators, gloves, goggles etc. for all personnel in the containment area.
o All personnel in the work area must properly equip all required PPE when in the designated containment area.
• Properly collect and dispose of all asbestos-containing debris and wastes hazardous material off site.
o All manifests for the disposal of ACM must be signed by the environmental Hazardous Waste Manager prior to shipping material off-site.
3.4 Demobilization and clean up
• Have a clearance test performed by a third-party inspector to ensure the area has been decontaminated and is a safe working environment.
• Dispose of any contaminated material off-site i.g. tarps used to cover equipment, HEPA filters used for ventilation, other PPE that cannot be reused, etc. in a manner that is in accordance with EPA guidelines.
• Provide any post abatement test results to the Project Manager/Contracting Officer Representative.
This acquisition is set-aside for 100% small businesses. The North American Industry Classification System (NAICS) Code is 236220. The small business size standard is $45M.
Department of Labor Wage Determination based on location of the service provided (Richmond, VA). Partial proposals will not be accepted.
For an offer to be considered for award, the contractor must own, possess, or otherwise control a bona fide place of business from which mobilization occurs within 125 miles of Defense Supply Center Richmond. A bona fide place of business refers to a location where the offeror regularly maintains an office with at least one full-time employee. The offeror must include the address of this location in its bid.
Award will be made to the lowest priced, technically acceptable (LPTA) offeror that meets the requirements stated in the Statement of Work and the solicitation. Also refer to clauses and provisions included in this notice. Past performance will be considered a part of Technical Acceptability, and the Contracting Officer will pull contractor data from CPARS and SPRS. The contractor must be registered in the System for Award Management (SAM) prior to award. If not already registered in SAM, go to the SAM website www.sam.gov to register prior to submitting your quote.
Acceptable method of quote or inquiries submission is Email to [email protected].
A site visit will be held 27MAY26 @1300. See p.46 of SOW for DSCR map for location of DSCR B60 meeting location and parking location. There is a map at the end of the SOW.
In order to attend the site visit interested parties MUST follow the instructions below no less than 5 business days prior to the site visit. This is to allow time for vetting by base security. Plan on arriving at DSCR an hour prior to the site visit time, as the processing time through the visitor center fluctuates. Follow the link below to register through DBIDS, and a QR code should be provided for each visitor. The QR codes MUST be emailed to the Project Manager, Jose Reynoso <[email protected].> ((804) 279-2970). The QR code MUST be emailed to the project manager as soon as possible due to the lengthy vetting process of approximately 5 business days. The project manager will also serve as the sponsor for site visit attendees.
A new system was implemented on 3 January 2023 to screen visitors and contractors for installation access at DSCR. The new system is designed to increase efficiencies, enhance the protection of personal information during the vetting process and eliminate the use of hard copy DLA Form 1815s. The new screening system will require visitors and contractors to pre-enroll in DBIDS (Defense Biometric Identification System). To begin the process, visitors and contractors will complete registration through the pre-enrollment website:
https://dbids-global-enroll.dmdc.mil.
Upon entry of their information, visiting personnel will be provided an electronic form to download, which will have an individualized barcode and alpha numeric code. The codes need to be sent to the visiting person’s sponsor. Once in receipt of the barcode, the sponsor will email Security and Emergency Services and provide the barcode and sponsorship information. Once the visitor/contractor is vetted and approved for installation access, Security & Emergency Services will notify the sponsor that the visitor/contractor can go to the DSCR Visitor Center to obtain his/her pass. At the Visitor Center, the visitor provides the barcode and code provided earlier in the process and completes the credentialing process.
See attached SOW for full requirement details. Parties interested in submitting a quote for this project are advised and expected to have reviewed the entire SOW prior to site visit attendance.
Questions are due on 29MAY26, end of day. Submit questions via email to [email protected].
Quotes are due 15JUN26, end of day.
The point of contact (POC) for this requirement is Benjamin Maxwell ([email protected]).
Reference Attachment 1 - Statement of Work (SOW) for additional work scope and details.
Period of Performance:
90 days from Notice to Proceed
MAGINITUDE OF CONSTRUCTION
36.204 Disclosure of the magnitude of construction projects. | Acquisition.GOV
In accordance with FAR Part 36.204(b), the estimated Magnitude of Construction for this contract is between $25,000 and $100,000.
The Defense Logistics Agency, DCSO Richmond Division #1, has issued a solicitation under solicitation number SP470326Q0045 for the demolition and disposal of an abandoned air handler system at the Defense Supply Center Richmond (DSCR) in Building 60D. This project requires asbestos abatement for a system confirmed to contain hazardous materials, followed by the permanent sealing of the area. The contractor is responsible for establishing negative air pressure containment, performing mechanical removal, and coordinating third-party clearance testing to ensure the site is decontaminated. The work is classified under NAICS code 236220 for Commercial and Institutional Building Construction and PSC code Z2GZ for REPAIR OR ALTERATION OF OTHER WAREHOUSE BUILDINGS.
This acquisition is a 100% Small Business Administration (SBA) set-aside and will result in a firm-fixed-price award based on a lowest priced, technically acceptable (LPTA) evaluation. The estimated magnitude of construction is between $25,000 and $100,000, with a performance period of 90 days following the Notice to Proceed. To be eligible for award, the offeror must maintain a bona fide place of business with at least one full-time employee within 125 miles of the Richmond, Virginia, performance site.
The response deadline for this solicitation is June 13, 2026. Benjamin Maxwell serves as the primary point of contact for inquiries and quote submissions. Available project documentation includes a statement of work, a site visit sign-in sheet, a wage determination, and the standard solicitation form. All personnel entering the site for the required work must comply with the Defense Biometric Identification System (DBIDS) vetting procedures for installation access.
Generated by Lumen AI
Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.