Name | Type | Posted | Actions |
|---|---|---|---|
https://dodprocurementtoolbox.com/ | LINK | Sep 9, 2025 | |
https://www.acq.osd.mil/asda/dpc/ce/cap/docs/piee/PIEE_Solicitation_Module_Vendor_Access_Instructions.pdf | LINK | Sep 9, 2025 | |
https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml | LINK | Sep 9, 2025 | |
https://piee.eb.mil/sol/xhtml/unauth/search/oppMgmtLink.xhtml?noticeId=W911S225U2011¬iceType=CombinedSynopsisSolicitation | LINK | Sep 9, 2025 |
Lagoon Aerator Assembly
Contact and place of performance
Juanito Bautista
93928
Waste Water Aerator System MOTOR:HORSEPWER: 14.5-15.5RPM: 1150-1250Full Load AMPS:42/21Voltage 230/460Voltage Phase: 3Cycle: 60Service Factor: 1.15-1.20Insulation Class: ?F? NON-Hygroscopic Bearings:Double Row Angular Contact Bearing Life: 950K-1200K hours Enclosure: Totally Enclose Fan-Cooled Motor (TEFC)MOTORSHAFT: Shaft Material: 17-4 Precipitation-Harding (PH), Stainless steel ( S.S), 1150 Condition Shaft Length:...
View moreThe Department of the Army, MICC-Fort Drum, has issued a combined synopsis/solicitation under solicitation number W911S225U2011 for a lagoon aerator assembly. This requirement is classified under NAICS code 333998, All Other Miscellaneous General Purpose Machinery Manufacturing, and PSC code 4630, Sewage Treatment Equipment. The procurement is designated as an SBA (Small Business Administration) set-aside. Interested parties must submit their responses by the deadline of September 16, 2025.
The scope of this acquisition involves the delivery of a waste water aerator system featuring a 14.5-15.5 horsepower motor with a totally enclosed fan-cooled (TEFC) enclosure and a 17-4 precipitation-hardening stainless steel motor shaft. Technical specifications for the assembly include a 316 stainless steel propeller, a 304 stainless steel and fiber-reinforced plastic (FRP) deflector, and an 88-inch diameter aerator float constructed with chemical-resistant resin and closed-cell polyurethane foam. The completed unit must weigh approximately 1,700 pounds and provide a pumping rate of 12,172 gallons per minute with a minimum oxygen transfer rate of 3.0 pounds per horsepower per hour.
Performance requirements dictate that the unit maintains a minimum oxygen dispersion diameter of 210 feet at a six-foot depth. The vendor is required to provide an aerator dimensions chart and manual as part of the delivery. The place of performance is managed by the MICC-Fort Drum office, and the contractor must be capable of completing delivery on weekdays between the hours of 7:00 AM and 3:00 PM. Juanito Bautista is the designated point of contact for this solicitation.
Generated by Lumen AI
Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.