Name | Type | Posted | Actions |
|---|---|---|---|
https://dodprocurementtoolbox.com/ | LINK | Sep 18, 2025 | |
https://www.acq.osd.mil/asda/dpc/ce/cap/docs/piee/PIEE_Solicitation_Module_Vendor_Access_Instructions.pdf | LINK | Sep 18, 2025 | |
https://pieetraining.eb.mil/wbt/xhtml/wbt/sol/index.xhtml | LINK | Sep 18, 2025 | |
https://piee.eb.mil/sol/xhtml/unauth/search/oppMgmtLink.xhtml?noticeId=W911S225U2104¬iceType=CombinedSynopsisSolicitation | LINK | Sep 18, 2025 |
Bollards and Thrust Blocks
Contact and place of performance
Carrie Lawton
13602
Specifications for Bollards Concrete minimum strength 5000psi @ 28days 8 inch Diameter Galvanized Sch40 steel pipe 10 FT long filled with concrete. Set in a 5 ft 8 inch 24 inch Diameter concrete base. Base will have 8 foot concrete on bottom for pipe support. Total length will be 10 Ft 8 inch bollard. Two rebar lifting lug will be set in top of concrete base for setting bollards. Specifications for Thrust Blocks Concrete minimum strength 5000psi @ 28 days Block will be 1Ft 6 inch X 1 Ft 6 inch square Type R anchor lifting lug will installed for set thrust block.
The Department of the Army, MICC-Fort Drum, issued combined synopsis/solicitation W911S225U2104 for the acquisition of bollards and thrust blocks. This procurement is designated as an SBA Small Business Administration set-aside. The opportunity is classified under NAICS 327390 Other Concrete Product Manufacturing and PSC 3630 CLAY AND CONCRETE PRODUCTS INDUSTRIES MACHINERY. All responses are due by the deadline of September 23, 2025, to the attention of point of contact Carrie Lawton.
The requirement specifies bollards with a total length of 10 feet 8 inches, featuring an 8-inch diameter galvanized Schedule 40 steel pipe filled with concrete. Each bollard is set into a 24-inch diameter concrete base that is 5 feet 8 inches deep, including 8 inches of concrete at the bottom for pipe support. Two rebar lifting lugs must be set into the top of the base for installation. Additionally, the solicitation includes thrust blocks measuring 1 foot 6 inches square. All concrete components for both the bollards and thrust blocks must maintain a minimum strength of 5,000 psi at 28 days. Thrust blocks are to be equipped with a Type R anchor lifting lug for setting.
Generated by Lumen AI
Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.