Contact and place of performance
Shellby Hammond
Curtis Bay, MD 21226
USA
This is a combined synopsis/solicitation for commercial items, prepared in accordance with the format in subpart 12.6 of the FAR and as supplemented with additional information included in this notice. This announcement constitutes only solicitation; quotes are being requested and a separate written solicitation will not be issued. Solicitation number 2126406Y6125705001 applies and is used as a Request for Quot...
View moreBasis for Award: This solicitation is based on FAR 13 – Simplified Acquisition Procedures and quotes will be reviewed and awarded on a Best Value basis per the solicitation. Past performance will only be reviewed for “responsibility” basis per FAR 9.1. The evaluation criteria for the quote’s will be who meets all the technical requirements, who meets our deadlines and price.
All quotes must include the drawings approved by a professional engineer that are stated in the Statement of Work in order to be considered. Drawings will then be reviewed by U. S. Coast Guard Yard Structural and Safety departments to ensure it meets our needs.
All quotes shall be emailed to Shellby Hammond via [email protected] and shall be received no later than April 24, 2026 at 1200 (Eastern). All emailed quotes shall have 2126406Y6125705001 in the subject of the email.
If a Site Visit is required in order to bid, please email James Greenfield via [email protected] in order to schedule.
Vendor Information:
Entity Name
Entity Unique Entity ID
Entity Address
Entity POC
Entity Phone Number
POC Email Address
Vendor shall provide:
Line 1: 110’ WPB CRADLE AND SPREADER BAR RECERTIFICATION
DESCRIPTION: The Contractor shall provide services to certify 01 docking cradle and 01 spreader bar identified as 110-foot USCG Cutter Cradle No. 3(CGY-C110-3) and Spreader Bar No. 1 (CGY-S110-1). The slings are NOT part of this certification and are to be certified IAW standard CFR/OSHA requirements. Cradle and spreader has been proof loaded and no structural modifications have been made that would invalidate that proof load test. Failure to have the following may negate your ability to bid.
- Surface Forces Logistics Center Standard Specification 8634 (SFLC Std Spec 8634), -2022 Drydocking
- United States Coast Guard Drawing No. 87WPB 085-12, Rev A, 87 Ft Coastal Patrol Boat Lifting Cradle
Available post-award upon request:
- Previous certification reports
- Docking history
- Last Non-Destructive Inspection (NDI) Report
- Last completed load test
The Contractor shall conduct all necessary inspections required to certify 01 docking cradles, constructed in accordance with referenced drawings. Certification shall meet requirements stated within SFLC STD Spec 8634. Certifying Authority shall provide requirements for type of weld inspection and length of weld inspection required for certification. The cradle has been previously load tested; re-load testing is not required. All inspections shall be conducted at USCG Yard, Baltimore MD 21226. All work and applicable deliverables shall be provided between 5/1/26 - 5/31/26.
Contractor shall provide a Certification Report, which shall include, at minimum, the following:
- Appendix B-2 (of SFLC STD Spec 8634), signed and sealed by a Professional Engineer (State of Maryland)
- Appendix B-23 and
- Appendix B-24 of SFLC STD Spec 8634, completed.
- Inspection Overview
- Proof Testing, as applicable.
- Inspection Findings with supporting documentation, as applicable.
- Surveyor's Endorsement, annotated as "SATISFACTORY" or "UNSATISFACTORY". Any contingencies to endorsement must be clearly noted.
- NDT Weld Test Report
Unit of Issue: 1 JB
Line Total:
Estimated Performance Date:
*All Work must be completed in accordance with the attached Statement of Work for the order.
*Access to some drawings may be Export-Controlled and require any recipient to be registered in the Joint Certification Program (JCP) through DLA to receive the drawing. *
*Services are Required on the following date(s): 5/1/26 – 5/31/26*
Place of Performance:
U.S. COAST GUARD YARD
2401 HAWKINS POINT ROAD
BALTIMORE, MD 21226
Invoicing In IPP
It is a requirement that all invoicing for Purchase Orders will now be entered and processed through https://www.ipp.gov.
All invoices must contain the following information: CG Purchase Order number, vendor’s invoice number, cage number, PO item number, description of supplies or services, unit prices and extended totals (INVOICES FOR PURCHASE ORDERS AWARDED BY SURFACE FORCE LOGISTICS CENTER, BALTIMORE ARE TO BE SUMITTED AS NON PO IN IPP). Shipping costs will be indicated as a separate line item on the invoice (if applicable). Shipping cost $100 or more must be accompanied by a separate freight invoice when submitting an invoice(s) for payment (if applicable).
To submit an invoice, vendor must have access to www.ipp.gov. To gain access please indicate if you don’t have an account So the issuing office can establish one for you.
FAR Clauses
This order is subject to but is not limited to the following Federal Acquisition Regulations:
52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.
52.204-26 Covered Telecommunications Equipment or Services-Representation.
52.212-1 Instructions to Offerors—Commercial Products and Commercial Services.
52.212-3 Offeror Representations and Certifications—Commercial Products and Commercial Services.
52.204-23 Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab Covered Entities.
52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.
52.212-5 Contract Terms and Conditions Required To Implement Statutes or Executive Orders—Commercial Products and Commercial Services.
The U.S. Coast Guard Surface Forces Logistics Center (SFLC) Procurement Branch 3 has issued a combined synopsis/solicitation for the recertification of one docking cradle and one spreader bar at the U.S. Coast Guard Yard in Baltimore, Maryland. This requirement falls under NAICS 541330 for Engineering Services and PSC H320 for Inspection of Ship and Marine Equipment. The procurement is designated as a small business set-aside (SBA) and will result in the award of a firm-fixed-price purchase order. The contractor is responsible for certifying 110-foot USCG Cutter Cradle No. 3 and Spreader Bar No. 1 in accordance with SFLC Standard Specification 8634 and applicable drawings.
The scope of work involves conducting all necessary inspections at the Curtis Bay, Maryland facility to certify the equipment, which has been previously load tested and requires no further structural modifications or re-load testing. Contractors must submit drawings approved by a professional engineer with their quotations, which will then be reviewed by the Coast Guard Yard Structural and Safety departments. Deliverables include a comprehensive certification report containing a Surveyor's Endorsement, a Non-Destructive Testing (NDT) weld test report, and specific appendices from SFLC STD Spec 8634 signed and sealed by a Professional Engineer licensed in the State of Maryland.
Performance is scheduled to occur between May 1, 2026, and May 31, 2026. This solicitation, identified by number 70Z04026Q60746Y00 (with quote reference 2126406Y6125705001), will be evaluated on a best-value basis considering technical requirements, deadlines, and price. Quotations are due by April 24, 2026, at 12:00 PM Eastern. The point of contact for this requirement is Shellby Hammond, and the solicitation includes two attachments: the FAR Clauses and a Statement of Work. All invoicing for this order must be processed through the Invoice Processing Platform (IPP).
Generated by Lumen AI
Scoped analysis and attachments—go beyond the summary when you need detail from the solicitation package.